eSUN PLA+ 1.75mm 3D Printer Filament 1KG

eSUN 3D Printer Filament: PLA PRO (PLA+)

PLA PRO(PLA+) Advantages:

Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problems. Prints are hard to break.

PLA PRO(PLA+) print temperature is about 20 degrees Celsius higher than regular PLA. Most users print at around 210 to 215 Celsius.

Print temperature (Degrees Celsius): 205 - 225
Bed Temp (Degrees Celsius): Can be printed without heat, with heat: 60 - 80
Density (g/cm3): 1.25
Tensile Strength: 65Mpa
Elongation at break: 12%
Flexural Strength: 75Mpa
Flexural Modulus: 2102mpa
Impact strength: 8.5KJ/m3
Melt flow index: 4g/10min@190degrees/2.16kg
Heat Deflection Temperature: 52 Degrees Celsius, 0.45Mpa
Filament Tolerance: +/- 0.03 mm